10 Best Sbc Dual Plane Intake Manifold Review of 2021

Top 5 Best Sbc Dual Plane Intake Manifold: Editor Recommended

The 10 Best Sbc Dual Plane Intake Manifold Reviews:

1. Edelbrock 2701 Performer Intake Manifold

Edelbrock 2701 Performer Intake Manifold

The Edelbrock Performer Intake Manifold delivers superior performance with square-bore carburetors. Horsepower gains from idle to 5, 500 RPM, when used with Performer Series square-bore or Thunder Series AVS carburetors.

Dyno tests show that the power gains an extra 5 horsepower, 9 foot / pounds and torque across the entire RPM range over their own performer manifolds.

Highlighted Features:

  • Made of aluminum with a natural finish
  • Dual plane intake style
  • RPM range is idle to 5, 500 RPM
  • Single carburetor without EGR
  • Use on stock or original equipment standard deck
  • Fit type: Vehicle Specific

Buy on Amazon

2. Assault Racing Products PC2020 Small Block Chevy Dual Plane High Rise

Assault Racing Products PC2020 Small Block Chevy Dual Plane High Rise

This is a new polished aluminum dual plane intake for small block Chevy. 180° high rise design, big power over a wide RPM range. Ideal for everyday to high performance street applications, will produce power in the lower RPM range and not kill your bottom end like a single plane would.

Intake works with 283-400 small blocks up to 1995. Includes special adapter bushings for the middle holes on the ’87 to ’95 heads. Does not fit the newer Vortec heads. For use with square bore style carbs.

Provides standard bosses and tapped holes for street accessories, accepts late model wateneck, A/C and alternator brackets, and HEI. It also has a provision to add early style oil fill tube.

Does not have provision for manual choke and are not EGR equipped. Will not fit under stock Corvette hood.

These intakes are produced from steel molds to reduce core shift and have all the major features found on the expensive ones such as 4 corner water outlets, dual distributor hold downs, nitrous bosses, and the best part – the price!

Highlighted Features:

  • RPM Range: 1500 – 5500
  • Dual Plane High Rise
  • Manifold Height: 4.65 in
  • Square bore carb bolt pattern for the Holley 4150/4160 style carburetor
  • Does not have provision for exhaust heated choke

Buy on Amazon

3. Aluminum Intake Manifold High Rise Dual Plane

Aluminum Intake Manifold High Rise Dual Plane

Features:Accepts late-model water neck, air-conditioning, alternator, and HEI brackets. Cast-in bosses on intake runners, can be drilled and tapped for use with nitrous or fuel injection.

Ideal port position – allows custom porting for maximum power. Dual distributor hold-down provisions for extra protection against distributor rotation. Does not have provision for exhaust heated choke.

Highlighted Features:

  • Brand new with high quality
  • Intake Port Dimensions: 2.09″x1.25″, Manifold Height: 4.65″
  • RPM Range: 1500 – 6500, 180° dual plane medium rise design for outstanding power from 1500 to 6500 RPM
  • Four corner water outlets
  • Square bore carb bolt pattern for the Holley 4150/4160 style carburetor

Buy on Amazon

4. Assault Racing Products PC2026 Small Block Chevy Dual Plane Air Gap Satin

Assault Racing Products PC2026 Small Block Chevy Dual Plane Air Gap Satin

This is a new satin aluminum dual plane intake for small block Chevy. 180° high rise design, big power over a wide RPM range. Has the open air area under the carb pad to help keep fuel mixture cool and improve power.

Ideal for everyday to high performance street applications, will produce power in the lower RPM range and not kill your bottom end like a single plane would.

These intakes are produced from steel molds to reduce core shift, have all the major features found on the expensive ones such as 4 corner water outlets and nitrous bosses, and the best part – the price!

Intake works with 283-400 small blocks up to 1995. Includes special adapter bushings for the middle holes on the ’87 to ’95 heads. Does not fit the newer Vortec heads.

For use with square bore style carbs. Provides standard bosses and tapped holes for street accessories such as A/C and alternator brackets. No provision for manual choke or exhaust crossover and are not EGR equipped.

Highlighted Features:

  • RPM Range: 1500 – 5500
  • Dual Plane Air Gap
  • Manifold Height: 4.65 in
  • Square bore carb bolt pattern for the Holley 4150/4160 style carburetor
  • Open air gap under plenum for cooler fuel charge

Buy on Amazon

5. Speedway 1957-86 SBC Hi-Rise Intake Manifold w/Gaskets, Hardware

Speedway 1957-86 SBC Hi-Rise Intake Manifold w/Gaskets, Hardware

If you’re building a high-performance Small Block Fits Chevy on a budget, then this is the intake manifold kit for you! The Speedway Hi-Rise aluminum intake is a dual plane, 180° street manifold designed to be used with Holley, Carter AFB or Edelbrock square flange carbs.

Intake Manifold Power range is 1500-6500 RPM Larger-than-stock plenum and runners complement other upgrades Supports larger engines & enhances RPM potential Power comparable to single plane manifolds yet retains throttle response/drive ability of a dual-plane Dual distributor hold-downs Accepts

HEI distributor Available in plain or polished finish No provisions for stock oil fill tube or stock exhaust-heated chokes. Will not fit under Corvette hood. No adapters included Intake Manifold Gaskets for 265-400 SBC No end seals – use silicone gasket maker

Manifold Bolt and Washer Set Designed for Chevrolet 265-400 small block engines 3/8 inch-16 by 1-inch bolts Kit includes 12 bolts and washers Manufactured from high-quality steel Bolts feature hex heads Distributor Hold-Down Chrome OEM-style distributor clamp with bolt Fits 1963-Up Fits Chevy

Highlighted Features:

  • These hi-rise intake manifolds are specifically designed for the 1957-86 SBC
  • Has larger-than-stock plenum and runners complement other upgrades
  • Engineered to support larger engines & enhances RPM potential
  • The power is comparable to single plane manifolds yet retains throttle response/drivability of a dual-plane
  • There are no provisions for stock oil fill tube or stock exhaust-heated chokes

Buy on Amazon

6. Assault Racing Products PC2028 Small Block Chevy Dual Plane

Assault Racing Products PC2028 Small Block Chevy Dual Plane

This is a new aluminum dual plane intake for small block Chevys with Vortec heads. 180° high rise design, big power over a wide RPM range. Has the open air area under the carb pad to help keep fuel mixture cool and improve power.

Ideal for everyday to high performance street applications, will produce power in the lower RPM range and not kill your bottom end like a single plane would.

These intakes are produced from steel molds to reduce core shift, have all the major features found on the expensive ones such as 4 corner water outlets and nitrous bosses, and the best part – the price!

Intake works with small blocks with ’96+ Vortec heads. For use with square bore style carbs. Provides standard bosses and tapped holes for street accessories such as A/C and alternator brackets. No provision for manual choke or exhaust crossover and are not EGR equipped.

Highlighted Features:

  • RPM Range: 1500 – 5500
  • Dual Plane Vortec
  • Manifold Height: 4.65 in
  • Square bore carb bolt pattern for the Holley 4150/4160 style carburetor
  • Open air gap under plenum for cooler fuel charge

Buy on Amazon

7. Assault Racing Products PC2006 Small Block Chevy Dual Plane 

Assault Racing Products PC2006 Small Block Chevy Dual Plane

This is a new polished aluminum dual plane intake for small block Chevys with Vortec heads. 180° design for power over a wide RPM range. Ideal for everyday to moderate street performance applications, produces best power from idle to 5500 RPM. Designed to fit ’96 and later engines and early motors with the Vortec head swap.

These intakes are produced from steel molds to reduce core shift and are 100% pressure tested to insure leak free operation. They also have all the major features found on the expensive ones such as 4 corner water outlets, dual distributor hold downs, external water bypass provision, and the best part – the price!

Intake works with small blocks with ’96+ Vortec heads. Can use both spread bore carbs such as Rochester and also square bores such as Holley and Edelbrock.

Includes adapter plate and gasket for the square bore style carbs. Provides standard bosses and tapped holes for street accessories such as A/C and alternator brackets. Works with HEI distributors. No provision for manual choke and are not EGR equipped.

Highlighted Features:

  • RPM Range: Idle – 5500
  • Dual Plane Vortec
  • Manifold Height: 4.25 in
  • Can use either spread or square bore carbs, includes adapter plate and gasket for square bores

Buy on Amazon

8. Assault Racing Products PC2012 Small Block Chevy Dual Plane Plus Polished

Assault Racing Products PC2012 Small Block Chevy Dual Plane Plus Polished

This is a new polished aluminum dual plane intake for small block Chevy. 180° medium rise design, big power over a wide RPM range. Ideal for everyday to high performance street applications, will produce most power from idle to 5500 RPMs and not kill your bottom end like a single plane would.

These intakes are produced from steel molds to reduce core shift and are 100% pressure tested to insure leak free operation. They also have all the major features found on the expensive ones such as 4 corner water outlets, rear water crossover, nitrous bosses, and the best part – the price!

Intake works with 283-400 small blocks up to 1995. Includes special adapter bushings for the middle holes on the ’87 to ’95 heads. Does not fit the newer Vortec heads. For use with square bore style carbs.

Provides standard bosses and tapped holes for street accessories such as A/C and alternator brackets. No provision for manual choke and are not EGR equipped.

Highlighted Features:

  • RPM Range: Idle – 5500
  • Dual Plane Plus
  • Manifold Height: 4.40 in
  • Square bore carb bolt pattern for the Holley 4150/4160 style carburetor
  • Accepts late-model water neck, air-conditioning, alternator, and HEI brackets

Buy on Amazon

9. DNA Motoring LEPOW-009 Dual Plane Aluminum Intake Manifold Assembly

DNA Motoring LEPOW-009 Dual Plane Aluminum Intake Manifold Assembly

Our intake manifolds are the perfect performance upgrades for your engine. The intake manifolds feature a high-flow runner design to deliver improved power from idle to 6, 500 rpm.

These cast-aluminum manifolds are pressure-tested for leaks. Chevrolet manifolds will clear HEI ignition systems. Fit 96-02 Chevy SBC 5. 0L 5. 7L Engines with Vortec Heads 4-Barrel Square Bore Carburetors

Highlighted Features:

  • Cast Aluminum Construction; Natural Finish
  • Dual Plane Intake Manifold
  • For Use on 8-Bolt Vortec Heads
  • 4.5″ Manifold Height
  • 500-6500 RPM Operating Range; No EGR

Buy on Amazon

10. Aluminum Intake Dual Plane Intake Manifold Compatible

Aluminum Intake Dual Plane Intake Manifold Compatible

This item is a brand new Intake Manifold. It will fit the following makes and models:
Compatible with 1996-2000 Chevy Vortec 350 383
Please Note Vortec Heads Only Have 8 Bolts that Hold the Intake On, 2 Bolts in Each Corner of the Intake, if your Intake has 12 Total Bolts then this Intake will not work.

Highlighted Features:

  • Dual Plane Design
  • These cast-aluminum manifolds are pressure-tested for leaks
  • Durable and long lasting
  • Improved power from idle to 6,500 rpm
  • Replaces Original Equipment (OE) number: 2116

Buy on Amazon

Leave a Comment