Does it take you five hours to hang a simple shelf? Do you get on your nerves when you see a crooked painting? Are the tiles in the bathroom falling apart?
Well, before even thinking about taking measurements, put the spirit level in a drawer and forget about the pencil.
Your inner handyman is crying out for a laser level in the toolbox . A surprisingly easy-to-use tool, which will allow you to project straight lines on walls and ceilings … and, for slightly more complicated jobs, mark crosses to combine different elements, follow diagonals to place a handrail or draw plumb lines with perfect verticality .
If you are a professional, we don’t need to explain the drama of getting the level wrong in a major work, and how much this simple tool will make your life easier .
If your thing is homemade bottling and you don’t skip a Bricomania program, get ready to face new challenges with the peace of mind that, at least, your final work will be balanced .
The 10 Best Laser Levels of 2020 Reviews:
Below you will find a list of the best laser levels that can be found currently on the market due to their characteristics, their quality / price ratio and the evaluations of experts and users.
10. Black and Decker BDL120-XJ
The first item on our top 10 list is this Black and Decker BDL120-XJ: a very basic tool that combines the typical spirit level with the laser for line drawing.
It is precisely in this simplicity where its strong point lies: the Black and Decker BDL120-XJ gives just what it promises and delivers more than enough for home and basic DIY operations.
Hang pictures or shelves, decorative objects, curtain rods … everything that needs a horizontal or vertical alignment is placed without complications thanks to its two leveling bubbles. However, if the idea is to do a bit more complicated work, such as tiling, this tool may fall short.
It is important to note that the laser does not allow cross projections, that is, the lines cannot be combined in both directions : it only shows the horizontal or vertical. Nor is it self-leveling , which means that it must be placed very well, guiding ourselves by the bubbles to achieve an accuracy of ± 1 mm in 3 m, the maximum distance from the lines.
The laser rotates 360 ° on the wall to generate a line at any angle. For this, it has a coupling in the form of a folding nail for drywall or masonry walls (which will leave a small mark).
Thanks to the combination of the typical spirit level with the laser for the drawing of lines, the Black and Decker BDL120-XJ is a basic and precise tool, with the guarantee of a recognized brand and designed for a punctual use in simple jobs. Handymen with more ambitious aspirations will find more suitable suggestions higher up on our list.
- The price, perfect for a basic level.
- Allows you to mark diagonal lines manually.
- Correct visibility indoors.
- The range is only 3 m.
- It is not self-leveling.
9. Bosch Quigo 3
The Quigo 3 is the Bosch proposal for the home handyman: a simple laser level, with the basic functions and a good result for domestic work that does not require a more complicated tool.
The housing is cube-shaped, with a cover that serves as protection when traveling and as a blocker. As soon as you get up, the tool turns on and projects two cross lines in the shape of a cross.
This allows working horizontally and vertically, but always displaying both references , since the device does not allow them to be displayed separately.
It is striking that the level of precision specified by the manufacturer is 8 mm / 10 m, when others in similar ranges are around 3 mm. However, in practice it seems a fairly accurate level, with a reasonable margin of error and good overall performance.
It serves as self-leveling and also allows you to align inclined objects , drawing diagonals to place handrails, borders, decorative vinyls, etc. In addition, it includes a clamp support with which the level can be fixed to objects with a thickness of between 1 and 6 cm, such as door frame, chair back, ladder rung, shelf …
With a range of only 10 m, the Bosch Quigo 3 is clearly intended for home work, indoors and not too large . If we move into these types of affordable projects, with this tool, domestic DIY will be much easier and faster.
- Good value for money.
- Includes stand and tripod.
- Small and light, easy to carry.
- The lines reach only 10 m.
- The specified precision level is 8 mm / 10 m, more than others in similar ranges.
8. Stanley Cubix
With a very affordable price, the Stanley brand STHT1-77340 is a simple cross laser that projects two lines, vertical and horizontal, with a range of 8 m . It is designed for handymen looking for basic functions without getting complicated with more technical details.
That is precisely why it is very easy to take advantage of it. The ease of use is evident , starting with its characteristic cube shape, which provides a very stable base for self-leveling: once placed on a more or less flat surface, the device itself adjusts just to give us the level , without us having to than to adjust the position manually. If the level is too far from horizontal when resting, the laser simply shuts off.
This “auto” function is optional, since the straight lines can be projected in any position , allowing elements to be placed diagonally, such as a handrail, or to project lines on the ceiling to install lamps, for example, or recess lights in a row.
The laser projects the lines in red; However, the power of light will only allow us to work indoors and in moderately small spaces, such as the rooms of a house or a domestic garage.
The cube has grooves to fit the Quicklink bracket, which allows the level to be adapted to different positions or surfaces . This base is shaped like a clamp, it is simple and perfectly complies to hook to any ruler, table, door frame, etc. If you prefer, the Stanley can be attached to a photographic tripod, the typical screw-in one.
In summary, this is a basic and very practical tool, designed for occasional jobs, home projects and Do It Yourself experiments.
- The price.
- Solid and good finish.
- The lock switch allows drawing lines not level, diagonal or to the ceiling.
- Low visibility outdoors.
- At more than 6 m he begins to lose precision.
7. Huepar 9011G
Compared to the usual red laser of most brands, Huepar’s 9011G level opts for the green color, which increases visibility even outdoors. For this, it incorporates optical technology from the German brand Osram, specialized in lighting solutions.
Hence, the manufacturer ensures that the range of the projected lines reaches up to 40 m , a large figure for a laser level of this price. In practice this number is reduced a bit, but it is true that in low light conditions (a cloudy day) its cross lines are more visible than other red laser models.
The margin of error is the usual one at a level of this type (3 mm for 10 m) and the rest of the characteristics remain within what is expected: the self-leveling function offers a margin of error of 4 ° to draw horizontal and vertical lines ; this function can also be locked to project straight lines at an angle , for example following the line of a staircase.
The functions are basic and easy to use, with a button for everything plus a switch for the lock function.
The 9011G is cube-shaped, with a shock-resistant rubber casing and IP54 protection against dust and water . It includes a magnetic aiming card that will help us to draw lines at a greater distance without losing precision, and an L-bracket , also magnetic, to facilitate its use on metal surfaces.
In general, the Huepar 9011G is very similar in shape and performance to the Stanley Cubix, although with a slightly higher price, which is explained by the green laser and the greater range of the lines.
- The high visibility green laser.
- Range up to 30/40 m depending on the exterior light.
- The casing is covered with rubber, with shock protection.
- The horizontal and vertical lines cannot be projected separately.
- In lockdown mode, the drawn diagonal flashes every few seconds to indicate that it is not straight; It can be annoying if we work for a long time.
6. Tacklife SC L03
The Tacklife brand has carved out a niche in the market thanks to the good ratings of Amazon users , the only channel where it sells its products.
One of the most interesting features of the SC L03 model is the possibility of varying the laser display mode, which changes color (interior mode in red, exterior mode in blue) to increase visibility. Realistically, for the price we cannot expect it to work luxuriously outdoors, but it does better than even more expensive levels.
Lines can be drawn in three modes: 360 ° horizontal, 130 ° vertical, and cross. It has a range of 30m, and is compatible with a receiver, increasing the distance up to 60m. The error range is the usual 3mm by 10m.
Leveling works in manual or automatic mode, and can be locked to mark diagonal lines, without annoying flickering.
Thanks to the rotating magnetic support, it can be attached to metal columns, it also has a mobile anchor and different thread sizes to attach to external supports or standard tripods.
The housing includes IP 54 protection, which keeps it safe from dust, which is essential on a construction site, and gives it a certain seal. The shopping box also comes with a protective bag.
In short, the Tacklife SC L03 offers surprisingly high performance for the price at which it is offered . Even so, for about $ 30/40 more, there is a superior version that allows you to draw the horizontal and vertical lines at 360 °. It’s the Tacklife SC-L04.
And, if what you want is something really simple, you have the SC-L01 .
- The price, less than $ 100
- The light changes color in indoor and outdoor mode to facilitate visibility.
- The magnet on the stand is very powerful.
- The light beam loses definition as the line lengthens. Better to use it in short distances.
- The clip for hooking to windows or frames could be more robust.
5. Bosch Professional GCL 2-15
The GCL 2-15 laser level is within the professional range of the Bosch brand , and is considered a very reliable tool for leveling work at short distances (up to 15 m).
We must then look at its margin of error (+/- 3 mm) to realize that, indeed, this level will allow us to face complex jobs with great precision , such as tiling, mounting furniture to the wall or plasterboard installations, both partitions as ceiling panels.
The GCL 2-15 projects a vertical and horizontal line in red, also in a cross, and with two plumb lines on the ceiling and floor .
In addition, thanks to the swivel mount you can direct the laser around the plumb points without having to reposition it. The bracket is magnetic and can also be placed on the wall or ceiling , to quickly mark profiles from different heights.
The internal pendulum functions as a self-leveling device, correcting unevenness of up to 4 ° (up / down) and is responsible for providing exact lines. If the unevenness is too great, the light flashes to warn; although if what we are looking for is precisely a diagonal, it is enough to disconnect the automatic mode, blocking the pendulum, and the line will be projected fixed.
Lines and landmarks show up clearly indoors , but visibility drops as soon as we step out and can be problematic on a very bright day. Even so, this tool has IP54 protection against dust and splashes of water, so it is suitable for use outdoors as long as the weather is not very adverse .
Although its advanced features may fall a bit short, the Bosch GCL 2-15 is a good tool that provides very accurate measurements for high-quality work .
For professionals who want a tool for daily use , and for home hands who face more complicated challenges than normal.
- Accurate measurements.
- Easy to use.
- Allows you to position the laser lines around the centered plumb points.
- A box or case to store laser and stand together is missing.
- The stand only rotates horizontally.
4. Bosch PCL 10
We find ourselves again with one of the best known brands in terms of DIY and construction tools, which of course does not disappoint. The Bosch PCL 10 is an accurate and versatile laser level that enters the realm of professional performance and will do wonders when tackling home renovation projects.
Self-leveling works automatically and is ready in a few seconds , and the different functions available allow you to locate individual horizontal and vertical lines, cross both, position lines on an incline and mark plumb levels.
One of the most notable features is the good visibility of the laser , thanks to high-quality diodes. The recommended work area is 10 m for optimal viewing, so this is a tool designed for interiors. Even so, its outdoor performance is reasonable , as long as we do not pose jobs over long distances.
The package includes a wall mount and a 1.5m tripod . If we prefer to use a tripod of another size, it is also possible to do so, thanks to the ¼ thread integrated into the structure. The grip is especially comfortable thanks to the soft rubber grip Softgrip.
The pendulum is self-locking in off mode to protect the mechanism during transport .
Although the price does not seem especially cheap, the truth is that the tool brings interesting extras , such as the tripod; the quality of the brand is also paid. Buying the Bosch PCL 20 laser level you take home a reliable and durable tool, with features that enter the professional field.
- Includes a 1.5 m tripod and a carrying bag.
- High visibility laser.
- Different functions available, depending on the type of line to be dialed.
- Accuracy is +/- 5mm / 10m, somewhat high.
- It has no magnetic base for metallic surfaces.
3. Makita SK104Z
Makita is a multinational of Japanese origin, specialized in the manufacture of power tools. Although it has several laser levels in its catalog, the Makita SK 104Z is the best valued by users for the quality of its projections (with a margin of error of 3 mm) and ease of use.
It has a simple control panel that allows you to operate all the available functions with two buttons : horizontal, vertical and cross line. Self-leveling is done by pendulum, which can be left fixed for safe transport or for sloping or diagonal work.
Like other similar levels, it includes a magnetic support with the possibility of screwing to non-magnetic surfaces . Unfortunately the stand is not height adjustable, but the tool can be attached to a standard tripod.
Also, the package contains a magnetic card to help us aim the laser more accurately. It is a small detail that is very useful in practice.
The lines are red, with two intensity settings to adjust according to the brightness level of the room: normal and eco , with a slightly dimmer light, very useful to reserve battery if it is used for a long time.
Visibility is good indoors, up to 15m, although the manufacturer claims that you can go up to 60m using a detector . This is interesting in large interiors (for example industrial buildings) or outdoors, where visibility will be compromised if we do not use some extra reinforcement. For that, it is protected against dust and water with IP54.
- Includes a case / shoulder strap where the laser and accessories fit.
- The light can be regulated in two intensity settings.
- Includes magnetic card to position the laser.
- The stand is not height adjustable.
- The functions are basic: horizontal, vertical and cross.
2. DeWalt DW088K-XJ
The DeWalt DW088K-XJ laser level is endorsed by one of the most recognized brands in the construction sector, so this is a tool with a great value for money, which provides high precision when working.
The light beams can be positioned horizontally, vertically and crosswise. It includes two use buttons and a low battery indicator. It provides an interior visibility of up to 15 m, which can reach 50 m with a detector , since it has the pulse mode to make it compatible.
The projected lines are a little thinner than usual in other brands of the same range, which allows to work more comfortably , with a margin of error that falls within the usual: 3 mm in 10 m.
Thanks to the magnetic support incorporated in the laser itself , it can be easily and quickly placed on the metal profiles of a structure. Also includes support for screeds and a hook for working on partition or plasterboard surfaces.
The housing is made of rubber and the protective glass of the laser is very thick; our tool will be well protected against possible shocks or falls . It also includes a rigid carrying case, which must be done with special care , since the self-leveling pendulum cannot be locked and is therefore less protected than desirable.
The quality of the guide lines, in addition to perfectly marking levels and leads, makes the DeWalt DW088K-XJ an especially suitable tool for drywall panel mounts , on ceilings or partitions, and for general masonry work.
- Wide reach, both for ceiling and perimeter, perfect for plasterboard mounting on ceiling and partitions.
- The magnet has a lot of power and effectiveness in the grip.
- Strong housing for construction work.
- The pendulum does not lock to work diagonally, causing a flickering that can be annoying.
- The hitch may be unstable on an uneven wall.
1. Leica Lino L2
The Leica brand will sound familiar to you for photographic cameras and, in general, precision optical instruments. Hence, the quality of the optical system has made the Leica Lino L2 one of the laser levels best valued by users.
The margin of error is +/- 2mm at 10m horizontally, when most levels in this price calculate 3mm. The degree of precision is , therefore, higher than average , something very interesting when considering particularly detailed work. The range of action reaches up to 30 m, which can be up to 60 m with the help of a receiver.
The self-leveling pendulum automatically stabilizes the line, which flashes when out of level. As usual, the pendant locks for angled lines or to protect the mechanism when not in use.
The quality of the laser is excellent, with great visibility and a pulse function with energy saving mode , essential for working outdoors with a detector, or for projecting lines over long distances. If we work outdoors, it is interesting to have the peace of mind of IP54 protection against dust and small damps.
The basic package includes a mini tripod that also doubles as a wall mount, a circular adapter for projecting lines at any angle, and a target plate that provides a reflective surface for better positioning of lines and working more comfortably outdoors; In addition, it comes with a carrying bag.
With a very characteristic aesthetic, this tool stands out especially for being very handy , with measurements similar to those of a tape measure and a weight of less than 400 g.
- Ultra-bright and highly visible laser.
- High precision of the lines.
- Allows you to draw 90 ° angles.
- Magnetic holder could have more strength
- If you want to hook it to the ceiling, you will need to buy an extra accessory.
Best laser level: Leica Lino L12
Number one on our list is in that position on his own merits. The Leica Lino L2 is exceptionally accurate (± 2mm / 10m, when most levels calculate within a 3mm margin), and for that alone it becomes one of our favorites.
But it also has a wide range of action (30 m) and is compatible with a receiver , which doubles the length of the lines drawn.
The quality of the laser does not disappoint, as befits a Leica brand product, and can be used in normal mode or in power saving mode , which is very useful for working for long periods of time, or to avoid running out quickly batteries if we work with a receiver.
Self-leveling balances in seconds and locks into diagonal lines. In this case, the line flashes every few seconds, warning of the unevenness. It is a characteristic to which you will have to get used to to work at ease, but it does not prevent you from carrying out the task efficiently.
The external appearance is curved and pleasant to the touch, it occupies and weighs little , and it has IP54 protection to make working outdoors safer.
Finally, we also like the extras it includes : a magnetic aiming board to draw lines more easily, a circular adapter to project lines at any angle and a mini tripod. If it’s more comfortable for you, the Leica Lino L2 can also be attached to a standard screw-in tripod.
Best cheap laser level: Stanley Cubix
Let’s put aside the puns about the film director and get to the point: the Stanley Cubix (if you prefer, the Stanley STHT1-77340) we love it because it has “the three bess”: this is a good, cheap and even pretty level , with that characteristic cube shape that makes it very comfortable to handle.
It costs less than € 50, is self-leveling and easy to use – frankly, we don’t think you could ask for more from a laser level in this range.
It projects the lines in three modes: horizontal, vertical and cross, something that, surprisingly, other more expensive levels do not . It also allows you to lock the pendulum to project diagonal lines or to the ceiling, or simply to transport it with the shock protected mechanism (another basic feature that not all include).
In addition, the laser used is class 1 , which does not need any extra precautions to protect the eyes. This is very interesting if you use it often or if you have children at home who can have access to the tools.
Clearly, the Cubix is intended for home use ; perhaps the most professional profiles should be priced a little higher. If what you are looking for is a precise and robust level, without the family economy suffering, the Stanley Cubix should have a place in your toolbox.
Best quality-price laser level: Tacklife SC L03
Can you get a laser level with professional benefits for less than $ 100 ? The answer is yes, if you choose the Tacklife SC L03.
There are three options for projecting the lines : horizontal at 360 °, vertical at 130 ° and both combined in a cross, which gives more possibilities when facing projects of a certain complexity, such as tiling or works with plasterboard.
We also value the ability to lock in self-leveling mode to project fixed lines at an angle . These are seen fixed on the chosen surface, while other tools blink warning of the unevenness, even if it is voluntary, a discomfort that is not insurmountable but is annoying. With the Tacklife we save ourselves this hassle to work on inclined surfaces.
In addition, the range of action is surprisingly high : 30 m, which can be even more, because this tool is compatible with a receiver.
But above all, we can choose between two laser colors: red, as usual, and a blue color that increases visibility outdoors. It is a very interesting feature to propose reforms in the garden or the patio of the house, for example. To withstand work outdoors, it has IP54 , which protects against dust (essential if we get into construction sites) and splashes of water.
User ratings tell us that this is a great product . In addition, within the same brand we can find levels with more or less benefits, always with an adjusted price.
Guide to buying the best laser level
What is a laser level for?
If you are a professional remodeling or construction worker, you may be able to skip this section, because you are well aware that working at the wrong level can be disastrous in certain jobs .
Now, if that laser thing sounds great to you, but only because you’re a Star Wars fan, keep reading. If in practice you are one of those who watches DIY programs like someone who watches National Geographic documentaries, full of distant and exotic subjects, you are going to be surprised, because a laser level turns into simple little jobs that used to bring you head , how to place a shelf or small decorative objects: paintings, photos, vinyls …
In summary: a laser level allows you to draw straight lines on a surface , which serve as a guide to position certain elements without deviating. The same is true for hanging a painting as for doing more complicated things such as tiling tiles, changing the frame of a door, or placing a false ceiling of plasterboard.
Traditional levels worked with a bubble, which you had to balance manually to get a more or less straight line.
A laser level does the same but more easily and precisely. Most are self-leveling, which saves you having to calculate the incline by eye.
The laser also draws straight lines on the wall or surface you choose , while if you want a similar effect with the traditional technique you will have to use a pencil, mark with masking tape or a small string that you will have to fix with nails so that it does not move. With a laser level you do it simply by pressing a button.
The same is true for horizontal and vertical lines . To draw the latter the plumb line was used, which is exactly what it seems: a small lead fixed with a rope at a high point, so that when it falls it marks a straight line, simply by the force of gravity.
In addition, most laser levels allow you to draw cross lines, marking an angle of 90 ° , and with that you can make, for example, watermarks like this. Can you imagine hanging this by eye?
And so far the basic functions of a laser level. We now go with other benefits that you must take into account before deciding to buy.
What will be the use of the laser level?
If your use is domestic, the normal thing is that it arrives with a basic level ; Unless you are a real handyman and you take care of the major repairs and home renovations.
The cross laser level is the most common, and it will work perfectly to install furniture on the wall or make tiles. However, if what you want is to align different objects in a room, you want the level to project the beam at 360 ° to quickly cover the entire contour of the room and not have to stop to move the level all the time, losing precision by the way.
If you are a professional , in addition to the characteristics that interest you, make sure that the structure or casing is resistant, that it has protection against dust and water, that the base is stable and that it has wall hooks , clamp-shaped support or is compatible with a tripod. The magnetic base also interests you if you work in environments where there are metal bases, such as beams or profiles.
Also look at the estimated margin of error – logically, the less the better – and the range of reach . And finally, note that the pendulum can be locked (auto off mode) to be able to transport the tool more safely.
Am I interested in a self-leveling laser level?
Our recommendation is that you look for a level that includes this option . It does not influence the price too much – not prohibitively, at least – and it will save you a lot of time, in addition to ensuring greater precision .
To level itself automatically, the tool has an internal device that oscillates like a pendulum. In this way, when the base is fixed and more or less straight (no more than 4 ° inclination), the laser is regulated to provide a straight and balanced line.
It is also interesting that the auto-level is blocked in order to provide a diagonal line . If you don’t, the machine will identify that angle as an error, and it will blink continuously to warn you that something is wrong. In addition, the lock protects the tool when you transport it from one place to another. If not, having a loose part is easier to get hit that can definitely damage the mechanism.
What range do I need on a laser level?
Look at the technical specifications, but keep in mind that, more than the line length you can get, it is important to see the margin of error with which you work . The longer the beam, the less accurate it will be.
Range is one of the most cost-effective features , so be realistic. If you are not going to take it out of the house, it comes with a laser level of 8/10 m, and the usual is a margin of error of 0.3 mm / m. If you have more ambitious goals, in the market you can find levels that go beyond 30 m with a margin of error of 0.1 mm / m. Of course, get ready to take out your wallet.
Do I need to protect my eyes to use a laser level?
Not especially… but it’s not a silly question. Note that a laser can be used as a simple pointer to point to a wall or as a tool for precision cuts in surgery. A laser of inadequate power applied to unprotected eyes can cause permanent injury.
In the case of levels, you should look at the kind of laser it uses.
Class 1 does not require any special safety measures , but in Class 2 it is recommended not to stare at the beam or its reflection for more than 0.25 seconds . That is, avoid exposing yourself directly to radiation, with a minimum of care will be enough.
In the higher classes the precautions increase, but it is not something that you should worry, you will not find lasers more intense than a class 2 at a level of this type.
Other important features in a laser level: ergonomics and accessories.
It is interesting that the tool is comfortable to use , ideally with a rubber base and a light weight or, at least manageable (it is rare that a level weighs more than a kilo).
Some levels have a non-slip base to facilitate installation , and even a magnet to be able to place it on a metal base , such as beams, pipes or profiles. Others include brackets for vertical installation , for example on a door frame or stair step, and most are compatible with standard photography tripods , allowing for height adjustment. They also usually have hooks to fix to the wall or ceiling.
It is also possible to use a reflective plate or target card . They are small plates -some of them magnetized- covered with reflective material, which make the laser light more visible with intense luminosity or at long distances.
Another element that may interest you are laser glasses . Keep in mind that they are not designed to protect the eyes (it is not necessary in class 1 or 2 lasers, which are the ones used at these levels) but to increase the visibility of the beam if it has little power or the conditions are adverse.
Finally, you can buy a laser level compatible with a receiver , a small device that is placed at the other end of the line, usually outdoors or in large spaces such as industrial buildings, and can increase the power of the beam up to 50%.
How much does a laser level cost?
In the market you have basic models for less than € 20, but for that price they will probably not be self-leveling , that is, you will have to balance the lines manually, with the bubble of a lifetime. And they may even only offer the ability to project a single horizontal line. Ok if you are only going to hang a painting, but you will get little more out of it.
From around $ 40, they already include a pendulum that self-regulates the inclination , always within margins that are usually 4 ° up or down. Here you can already find horizontal and vertical cross lines, which gives much more play when working.
If your budget increases, the benefits also increase: magnet to be able to fix to magnetic surfaces, more range of light to work on large surfaces, higher laser power to make lines more visible, supports or tripods for fixing, etc. Here you can already spend what you want, but a good laser level is within your reach for about $ 150 . If it is more expensive, it probably includes other functions such as distance measurement, connectivity, etc., whose interest you should assess in your specific case.
Most of the brands (Bosch, Stanley, DeWalt, Leica, Tacklife…) offer different types of laser levels, adapted to all types of pockets. If you follow this buying guide and focus on the functions you are going to use, finding the laser level you need will be easy.