10 Best Kicker Motor Bracket Transom Review of 2021

Top 5 Best Kicker Motor Bracket Transom: Editor Recommended

The 10 Best Kicker Motor Bracket Transom Reviews:

1. YaeMarine 2 Stroke Outboard Motor Bracket Kicker for Boat

YaeMarine 2 Stroke Outboard Motor Bracket Kicker for Boat

The mount has 4 locking positions which could locks the motor securely in place and fits nearly any outboard motor (refer to the model number of HP rating and capacity);
Each mount has 10.5″ of vertical lift fits both short shaft and long shaft outboard motors;
Fits most style of 2-stroke outboard motors; not recommended for 4-Stroke motors.
Motor Pad Size : 10-1/4″(tall) x 8″(wide) x 1/16″(thickness)
Vertical Lift : 10.5″
Mounting Bracket Size : 5-3/4″ wide by 4-3/8″
Weight Capacity: 110 lbs
Manual measurement, error 1-3cm, depending on the actual situation, please understand;
Please be careful of the sharp edge when you install;
If not 100% completely satisfied with our item, simply contact us to request a refund or exchange. 3 month money back/replacement guarantee, 24 months product defect free replacement warranty.

Highlighted Features:

  • Construction : All stainless stamped construction outboard motor bracket for 2-stroke motors, could bear up to 110 lbs;
  • Specifications : Motor pad – 7.9″(20.1cm) wide, 6.3″(16cm) and 8.15″(20.7cm) two side length, 1.09″(4.3cm) thick, stainless nylock nuts (metric); Mounting bracket to transom – 5-3/4″(14.61cm) wide by 4-3/8″(11.11cm); Vertical Lift – 10.5″(26.67cm);
  • Applications : Fits most style of 2-stroke outboard motors; not recommended for 4-Stroke motors.
  • Easy to install : 5 vertical running position lock bars; locking the safety knobs to keep the bracket in place; holds the outboard motor up or lowers the motor down for propulsion; could mounts easily on nearly any transom;
  • Note : please be careful of the sharp edge when you install; Please feel free to contact us if you have any question about the product. We would try our best to solve any problem for you. Wish you have a good shopping experience.

Buy on Amazon

2. PANTHER MARINE 55-0407AL Lightweight 4-Stroke

PANTHER MARINE 55-0407AL Lightweight 4-Stroke

Adjustable outboard motor bracket Works with 4- stroke motors up to 15 HP or 2- stroke up to 20 HP, max weight of 132 lbs. This black, hard-coat anodized aluminum bracket is built to handle the increased torque output of today’s four stroke engines.

Twist-knob Safety Locks provide increased torque rating while helping secure bracket in place. Motor’s weight is counterbalanced by heavy-duty stainless steel torsion springs for easy lifting.

Boasts a 2″-thick, extra-wide, weatherproof and maintenance-free polypropylene mounting board along with aircraft-type stainless steel hardware.

Five-position lock bar and 10″ of travel on 55-0407AL, and four-position lock bar and 11″ of travel on 55-0408SS allowing for better range of trim adjustment letting you fine tune motor height for optimal performance. Rated for long or short shaft engines.

Highlighted Features:

  • Designed for 2- and 4-stroke motors up to 15 HP or 132 lbs
  • 10″ of travel and 5 vertical running positions let you fine tune the motor height for optimal performance
  • Do not use without Panther 55-0415 safety cable—included
  • Meets ABYC Standards

Buy on Amazon

3. YaeMarine 7.5hp-20hp Heavy Duty Aluminium Marine

YaeMarine 7.5hp-20hp Heavy Duty Aluminium Marine

Retractable bracket for trolling auxiliary motors on power and sailboats with ease, Heavy duty with reinforced welded frame and stamped stainless components.

Spring loaded (5 vertical position) adjustable bracket, Wide track body for added stability. Heavy duty, lightweight marine grade anodized aluminum frame, stainless steel springs. Solid polypropylene mounting board. Easy to lift and lower – heavy duty springs help counterbalance motor weight.

Note : You can get the most friendly customer service, please feel free to contact us if you encounter any problems during use, 90 days free return or refund.

Highlighted Features:

  • Specifications : Board Area 260 x 205mm(10-1/4″ x 8″), Mount area on boat 135 x 230mm (5-1/4″ x 9″), Mount holes 8mm, Lift range 340mm (13-3/8″);
  • Outboard motor bracket suits 2-stroke motors 7 1/2 – 20 HP, with a maximum weight of 52kg (115lbs), Ideal for small to medium sized powerboats and yachts;
  • Material: Anodized aluminum construction; Solid polypropylene mounting board;
  • Mounting holes have a horizontal distance of 100mm across (centre to centre), and multiple vertical holes for different mounting options;
  • Note : You can get the most friendly customer service, please feel free to contact us if you encounter any problems during use, 90 days free return or refund.

Buy on Amazon

4. Brocraft Deck Mount Trolling Motor Bracket

Brocraft Deck Mount Trolling Motor Bracket

Find answers in product info, Q&As, reviews

Highlighted Features:

  • Universal trolling motor bracket for clamp-on type electric trolling motors.
  • Constructed of marine aluminum with black Nylon plastic
  • Designed for motor to be removed when boat is under engine power or being trailered.
  • For electric trolling motors only. Not for outboard engines of any size.
  • Maximum trolling motor thrust of 36 pounds, Come with a two years limited warranty

Buy on Amazon

5. Panther Marine 55-0410 Auxiliary Outboard 4-Stroke Motor Bracket

Panther Marine 55-0410 Auxiliary Outboard 4-Stroke Motor Bracket

Panther Marine 55-0410 Auxiliary Outboard 4-Stroke Motor Bracket – 10″

Highlighted Features:

  • Adjust your trolling or auxiliary motor to five vertical running positions for changing water or load conditions
  • The anodized aluminum bracket is built to handle the increased weight and torque output of today’s four strokes with long or short shafts
  • Fit type: Universal
  • Handles up to 35 HP, 263 lbs. motors with 10″ of travel

Buy on Amazon

6. M-ARINE BABY Outboard Motor Bracket Kicker for Boat

M-ARINE BABY Outboard Motor Bracket Kicker for Boat

M-ARINE BABY Outboard Motor Bracket Kicker for Boat, Marine Auxiliary Trolling Mount 7.5-20hp

Highlighted Features:

  • Capacity: 110 lbs, Vertical Lift: 10.5″
  • 5 locking positions possible
  • Stainless steel construction is non-corrosive for saltwater use
  • Fits most style of 2-stroke outboard motors; not recommended for 4-Stroke motors
  • Transom mount locks and holds the outboard motor up or lowers the motor down for propulsion

Buy on Amazon

7. Amarine Made 7.5hp-20hp Heavy Duty Stainless Steel Marine

Amarine Made 7.5hp-20hp Heavy Duty Stainless Steel Marine

Material: Stainless steel construction, solid polypropylene mounting board Board area: 270 x 210mm (10 1/2″ x 8 1/4″) Mount area on boat: 205 x 220mm (8″ x 8 5/8″) Mount holes: 8mm Lift range: 285mm/11.25″
Mounting holes have a horizontal distance of 170mm across (centre to centre), and multiple vertical distances of 100mm, 130mm, or 160mm(centre to centre)

Highlighted Features:

  • Stainless steel, spring loaded 4 vertical position) adjustable bracket,Heavy duty with reinforced welded frame and stamped stainless components
  • Solid polypropylene mounting board, Wide track body for added stability
  • Easy to lift and lower – Stainless springs help counterbalance motor weight
  • Outboard motor bracket suits 2-stroke motors 7 1/2 – 20 HP, with a maximum weight of 52kg (115lbs), Ideal for small to medium sized powerboats and yachts;
  • Note : You can get the most friendly customer service, please feel free to contact us if you encounter any problems during use, 90 days free return or refund.

Buy on Amazon

8. X-Haibei Outboard Motor Bracket for Boat Auxilary Up

X-Haibei Outboard Motor Bracket for Boat Auxilary Up

Transom mount locks and holds the outboard motor up or lowers the motor down for propulsion.

The completed installation should result in the cavitation plate of the outboard motor being parallel to the surface of the water. The height of the outboard bracket on power boats should be localted so that the cavitation plate is nearly flush with the bottome of the boat immediately forward of the engine being mounted.

Highlighted Features:

  • Hp Rating : to 10 hp
  • Mounting Size: 8inchx 8.625inch(Please look at the images for more detail sizes.)
  • Roller Size: 8.25*10.375inches
  • Base Material: Plastic

Buy on Amazon

9. Garelick/EEz-In 71056:01 Marine Stainless Steel Auxiliary

Garelick/EEz-In 71056:01 Marine Stainless Steel Auxiliary

The one in the picture has failed. The one on the other side is perfect. I think the bracket had a defect and the constant torque generated by the motor caused the bracket to deform. The last straw for me was that they don’t sell repair parts for their products.

This is a simple repair. Remove and replace 4 bolts. I would have been happy to purchase the part. The response was “buy a new unit”. I will, but it won’t be a Garlicky.

Highlighted Features:

  • Fit type: Universal Fit
  • Package Dimensions: 22.606 H x 60.198 L x 30.226 W (centimetres)
  • Country of Origin : United States
  • Package Weight: 16.6 pounds

Buy on Amazon

10. Attwood SP-400-RB Adjustable Transom Saver

Attwood SP-400-RB Adjustable Transom Saver

The innovative Attwood Adjustable Transom Saver helps lessen stress on a boat’s transom when a boat with an outboard motor is being transported on a trailer. This Transom Saver offers reliable support for the cantilevered engine and comes with a choice of mounts for the end attached to the trailer.

The composite head securely holds the engine, while you can use your choice of the roller bracket or trailer mount bracket at the trailer end. The Transom Saver is adjustable from 23 to 35 inches for the best fit and fullest support. This Transom Saver features durable, rugged construction.

Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing of the highest quality marine products for over 100 years.

Highlighted Features:

  • Innovative Transom Saver helps lessen stress on a boat’s transom when boat with an outboard motor is being trailered
  • Reliably supports the cantilevered engine during transport
  • Comes with a choice of mounts for the end attached to the trailer: roller bracket or trailer mount bracket
  • Composite head securely holds the engine
  • Durable, rugged construction

Buy on Amazon

Leave a Comment